Silicone Additives

HOWREN SILICONES offers a wide range of additives from various brands, including silicone additives, vulcanization accelerators, vlcanization accelerator, anti-yellowing additives, retarders, rubber additives and so on. By adding additives, the performance of silicone rubber and plastic products can be enhanced to meet specific functional requirements. With years of expertise in raw material supply, HOWREN SILICONES also independently develops various additives to meet specific customer needs in order to provide more flexible solutions.

Category		Brand	Product	Feature
Silicone Additives	Internal Mold Release Agent	HOWREN SILICONES	100R	• Mixed with silicone rubber to improve mold release performance
	Internal Mold Release Agent	MOMENTIVE	XE5178U
	Reversion Stabilizer	MOMENTIVE	SE6910MO	• Can eliminate post cure of silicone rubber when using Bis (2,4-di-chlorobenzoyl) peroxide cure system
	Flame Retardant Additive	WACKER	ELASTOSIL® AUX Batch SB 2	• Can improve the fire resistance of silicone rubber
		FR-6BL
		FR-6W
		MOMENTIVE	SFR-100
	Antibacterial Agent	HOWREN SILICONES	HR-BIOCIDE	• This antibacterial agent is specially used for the production of silicone rubber requiring an additional antibacterial property, which has a strong sterilizing and inhibiting effect on all bacteria and fungus (bactericidal rate > 99.99%) • No influence caused to the transparency or color of products
	Foaming Agent	007-WUF-40 (Powder)		• Closed foaming additive specially used for silicone rubber foam molding • Used as a lightweight filler in silicone rubber, thermoplastic plastics and other polymers • Provides the effect of weight reduction and density lowering • Exhibits good compression deformation with uniformly distributed and regular pore sizes
		920-DU-120 (Powder)
		930-DU-120 (Powder)
		980-MB-120 (Powder)
		WACKER	BTB2
		WACKER	MTB
		HOWREN SILICONES	GS-B
	Heat Stabilizer	WACKER	H0	• Heat stabilizer is added into silicone rubber compounds to increase the heat resistance of the product as well as prolong the service life of silicone elastomer • Can be used for both peroxide vulcanization and addition curing products
			H1
			H2
			H3
			H4
			H6
			H6F
		MOMENTIVE	SE-6916HA
	Shrinking Agent	HOWREN SILICONES	HR-ADA7001	• Add into silicone rubber, product dimension can be shrunk by approximately 45μmm~120μmm depending on different dosage added after post curing complete
	Radio Opaque Additive	WACKER	AUX8250-R0	• Designed for medical applications • Complies with ISO 10993 and United States Pharmacopoeia (USP) Class VI
Vlcanization Accelerator		HOWREN SILICONES	HR-Q1	• Suitable for use with cross-linking agents to enhance the reaction rate and accelerating the vulcanization process • Rapid vulcanization, can shorten the vulcanization time by about 25%~30%, reduce the vulcanization temperature and the amount of cross-linking agents
Platinum-cured Foaming Agent		KCC	SH0003A	• High transparency • Non-yellowing • No PCB curing
Fluorine Mold Release Agent		HOWREN SILICONES	MR-1	• Water-based fluorine release agent, no contamination causes to the mold • Suitable for all kinds of rubber molding with good release performance
UV Photoinitiator		ELKEM	PHOTOINITIATOR-2074	• Can initiate polymerization reactions under UV or visible light exposure, allowing silicone materials to cure rapidly • Helps reduce the energy consumption required for traditional heat curing and can minimize environmental impact.
Anti-yellowing Additives		HOWREN SILICONES	HR-ADH9202	• Primarily used together with cross-linking agent to prevent yellowing
Retarder		HOWREN SILICONES	HR-ADA9401	• Delays the cross-linking reaction time of silicone rubber
Mold Release Agent		HOWREN SILICONES	HR-ADA1201	• Semi-permanent silicone type mold release agent • Excellent release properties • Contains special silicone resin components that provide low surface energy • Suitable for carbon fiber fabric materials, epoxy resins, various rubbers, reinforced plastics, and their composites
Silicone Remover		Chela	DIGESIL NC	• Can dissolve cured silicone elastomer • Can break the Si-O bond in the silicone molecule and dissolve the cured silicone polymer • Can be used in engineering, construction process equipments, glazing, and electronic components and industrial electronics
Silicone Clay		HOWREN SILICONES	HR-9935A/B	• It can be shaped variously according to the user’s required shapes or molds, and can be mixed according to the ratio of different colors • Products can be shaped and cured with or without heating • Hardness and color can be customized according to customer’s demand •The product is suitable for making toys and mold handles
Silicone Spray Ink		HOWREN SILICONES	GS-026	• Excellent adhesion with strong coloring ability • Excellent weather resistance and chemical resistance • Capable of protecting the printing on silicone rubber
Adhesion Promoter		MOMENTIVE	XC 9603	• Use with HS4 • Can improve the adhesion of rubber and silicone coatings
Platinum Catalyst		MOMENTIVE	YC 6831	• Use with HS4
Anti-Abrasion Agent		HOWREN SILICONES	HR-ADA6001	• Can improve wear-resistance
Anti-Abrasion Agent		HOWREN SILICONES	HR-APA1101	• Can improve wear-resistance
Rubber Additives		HOWREN SILICONES	HR-ADA1001	• Can accelerate the softening and vulcanization process of EPDM, natural rubber, and synthetic rubber, and lubricate the rubber inside to improve mold release and processing plasticity

Applications

Electronic Communication Industry & Building Medical & Healthcare Automotive & Transportation Energy Textile Kitchenware Others

Applications

Electronic Communication Industry & Building Medical & Healthcare Automotive & Transportation Energy Textile Kitchenware Others